News

Home  -  News  -  Industry News

Linear vs. switching power supplies Not always an easy choice(1)

source:Industry News Popular:adapter release time:2021-08-26 10:41:32 Article author:sznbone

  There are some uses that demand the low noise and fast response only available through traditional linear supplies.

  ASK almost any engineer about linear power supplies and the likely instinctive reaction will be, “Sorry, I can’t use them — they’re too inefficient.” Any possibility of using a linear supply usually ends right there; it is as though you’re asking them to go back to vacuum-tube AM radios.

  Still, a good engineer knows that it’s wise to not make decisions based on assumptions and clichés, but rather on honest assessments of priorities and alternatives. This maxim also applies when deciding between a switching or linear power supply. Like many engineering decisions, this one depends on the specifics of the application, the features and functions it needs, priorities, and acceptable tradeoffs.

Linear vs. switching power supplies: Not always an easy choice(图1)

  First a quick review of the basics. A linear power supply first converts the high-voltage ac from the line into lower-voltage ac using a transformer. It then converts the low-voltage ac into an unregulated dc voltage via a rectifier and capacitor filters. An error amplifier with a voltage reference as one input and the output dc as the other controls a series-connected pass element. The error amplifier compares the reference to the output and regulates the output voltage by dropping excess voltage in the pass element, hence the designation “linear” supply.

  This closed-loop design ensures the supply output stays at the nominal voltage despite changes in supply line or load values. The downside of this arrangement is that the pass element is always in its active region. It dissipates power regardless of the power it is also delivering to the load; this is the major source of inefficiency in a linear supply.

  Now consider a line-powered switching supply. Here, the line ac is usually first converted to unregulated dc (again, via a rectifier and filter). Then the supply regulates that dc voltage down to the desired voltage. There are many topology variations of the switching concept, but all have a similar underlying principle. Again, an error amplifier compares the regulator output value to an internal reference, but here the pass element is rapidly switched on and off with a pulse-width modulation or pulse-frequency modulation scheme.

  The output pulses are filtered to form low-ripple dc and the resulting waveform becomes the dc voltage output. Because the pass element is either completely on or off, it is always in a mode where its dissipation is minimal. The main losses arise from the series on-resistance when the pass element conducts and switching losses as it transitions between on and off states.


Read recommendations:

Manufacturer desktop type 18w ac dc 12v switch power supply adapter 90v adaptor

54V/4.7A 12v/2.5a 260w switching power supply module bare board AC-DC buck module Step-down module

18W British Standard

Power adapter output overvoltage failure

European standard power adapter customization.manual charger power adapter

Previous:How to Pick Reliable Power Supplies? (3) Back to list Next:Linear vs. switching power supplies Not always an easy choice(2)

The latest article

Related Products

The latest article

What are the types of mobile phone chargers and their functions?

2022-05-21

Advantages of switching power adapters

2022-05-21

Five core functions that the power adapter can achieve.adapter manufacture

2022-05-20

Analysis of the importance of power adapters for notebooks.adapter Processor

2022-05-20

Details of switching power supply in maintenance

2022-05-19

Understand the precautions of the power adapter and be an expert in electricity safety

2022-05-19

This is how the EMC interference of the switching power supply is generated.adapter wholesaler

2022-05-18

The relationship between the nominal voltage and current of the power adapter.power adapter price

2022-05-18

Five basic functions of notebook power adapters.adapter wholesaler

2022-05-17

Lightning surge immunity test method.power adapter price

2022-05-17

Switching power supply ripple source and control

2022-05-16

Level 6 energy efficiency standard power adapter T series

2022-05-16

Children sleeping with pacifiers are prone to tooth decay

2022-05-16

Six methods to deal with the heating problem of switching power supply transformer

2022-05-14

The principle of flyback switching power supply

2022-05-14

Types of thermal protection for power adapters.adjustable power adapter

2022-05-13

Summary of common faults of LED switching power supply

2022-05-13

The power transistor should be used like this in the power adapter

2022-05-12

4 modulation methods of switching power supply

2022-05-12

Some little knowledge about switching power supply

2022-05-11

Laptop Power Adapter Troubleshooting Steps

2022-05-11

9 classification methods of switching power supply

2022-05-10

Advantages and disadvantages of switching power supply current mode

2022-05-10

Advantages and disadvantages of switching power supply current mode

2022-05-09

9 classification methods of switching power supply

2022-05-09

Characteristics and working methods of PFC regulated switching power supply

2022-05-07

Six maintenance rules for drone lithium batteries.manual charger power adapter

2022-05-07

Reasons for Inrush Current in Switching Power Supply Design.adjustable power adapter

2022-05-06

The optimal solution of drone power management solution!12w acdc power adapter

2022-05-06

Characteristics of Switching Power Adapter Transient Loads

2022-05-05