News

Home  -  News  -  Industry News

Desktop power adapter chooses magnetic core material

source:Industry News Popular:adapter release time:2021-05-26 09:50:10 Article author:sznbone

  The efficiency and performance of a saturated single-transformer converter mainly depends on the choice of transformer material. When working at high frequencies, low-loss rectangular hysteresis loop ferrite materials are usually selected. Rectangular hysteresis loops and band-wound toroid materials are also used, because very thin laminated core materials must be used in order to reduce losses, and these materials are more expensive at high frequencies. The recently developed amorphous alloy rectangular hysteresis loop material shows good properties in this application.

Desktop power adapter chooses magnetic core material(图1)

  For some rectangular hysteresis loop materials, the permeability (the slope of the B/H characteristic in the saturation region) after saturation is very low (B is high). The figure shows the characteristics of the H5B2 material. Therefore, the magnetic flux density change between S1 and S2 is very small, and the flyback effect during turn-off is weak, which makes the switch action slow during the conversion period. In the figure shown, it can be seen that H7A or similar core materials have a more powerful switching effect, but because these materials have low Br (remanence) values, core losses are often higher.

  For toroidal cores, it seems that the designer must use rectangular hysteresis loops, low-loss cores (low core loss but slow switching), or low-permeability and higher-loss cores (switching faster, but the magnetizing current is higher due to the smaller inductance. High, and there is a greater loss) to make a compromise choice. For other core structures, air limitation can be introduced to solve the problem. This can give a powerful switch without increasing the core loss. Suitable rectangular hysteresis loop and metal ribbon winding materials include rectangular permalloy, nickel-iron high-permeability alloy and various HCR materials. Some almost rectangular amorphous alloy materials can also be used. Be careful when choosing the rectangular hysteresis loop material. When the hysteresis loop is too close to the rectangle, it will not cause oscillation because the flyback effect is too weak.

  It is recommended to use rectangular tape loop ferrite material for high frequency applications. Suitable models include Fair-Rite#8 Siemens T26, N27, Philips 308 TDK H7C, H5BH7A and more.


Read recommendations:

4.2v 0.8a power adapter AC 90v-264v input to DC 4.2 12V class 2 wall amount switching power supply

80W bare board power supply

24W Thai standard

The power adapter needs to strictly control the quality of the factory

Power adapter matching

Previous:Introduction to commonly used capacitors Back to list Next:The development history of switching power adapter

The latest article

Related Products

The latest article

What are the types of mobile phone chargers and their functions?

2022-05-21

Advantages of switching power adapters

2022-05-21

Five core functions that the power adapter can achieve.adapter manufacture

2022-05-20

Analysis of the importance of power adapters for notebooks.adapter Processor

2022-05-20

Details of switching power supply in maintenance

2022-05-19

Understand the precautions of the power adapter and be an expert in electricity safety

2022-05-19

This is how the EMC interference of the switching power supply is generated.adapter wholesaler

2022-05-18

The relationship between the nominal voltage and current of the power adapter.power adapter price

2022-05-18

Five basic functions of notebook power adapters.adapter wholesaler

2022-05-17

Lightning surge immunity test method.power adapter price

2022-05-17

Switching power supply ripple source and control

2022-05-16

Level 6 energy efficiency standard power adapter T series

2022-05-16

Children sleeping with pacifiers are prone to tooth decay

2022-05-16

Six methods to deal with the heating problem of switching power supply transformer

2022-05-14

The principle of flyback switching power supply

2022-05-14

Types of thermal protection for power adapters.adjustable power adapter

2022-05-13

Summary of common faults of LED switching power supply

2022-05-13

The power transistor should be used like this in the power adapter

2022-05-12

4 modulation methods of switching power supply

2022-05-12

Some little knowledge about switching power supply

2022-05-11

Laptop Power Adapter Troubleshooting Steps

2022-05-11

9 classification methods of switching power supply

2022-05-10

Advantages and disadvantages of switching power supply current mode

2022-05-10

Advantages and disadvantages of switching power supply current mode

2022-05-09

9 classification methods of switching power supply

2022-05-09

Characteristics and working methods of PFC regulated switching power supply

2022-05-07

Six maintenance rules for drone lithium batteries.manual charger power adapter

2022-05-07

Reasons for Inrush Current in Switching Power Supply Design.adjustable power adapter

2022-05-06

The optimal solution of drone power management solution!12w acdc power adapter

2022-05-06

Characteristics of Switching Power Adapter Transient Loads

2022-05-05