9 classification methods of switching power supply

　　(1) According to the technology, the connection method of the switching tube, and the power supply technology, the switching power supply can be divided into a series switching power supply and a parallel switching power supply. The switching tube of the series switching power supply is connected in series between the input voltage and the output load, which is a step-down voltage regulator circuit; while the switching tube of the parallel switching power supply is connected in parallel between the input voltage and the output load, similar to redundancy The power supply belongs to the step-up voltage regulator circuit.

　　(2) According to the excitation mode, the switching power supply can be divided into self-excited and other-excited. In the self-excited switching power supply, a positive feedback loop is formed by the switching tube and transformer technology'> high-frequency transformer to complete the self-excited oscillation, which is similar to the intermittent oscillator; while the other-excited switching power supply must be attached with an oscillator to oscillate. The switching pulse generated by the device is added to the switch tube to control the on and off of the switch tube, so that the switch circuit works and has a DC voltage output.

　　(3) According to the modulation mode, the switching power supply like the server power supply can be divided into the pulse width modulation (PWM) mode and the pulse frequency modulation (PFM) mode. PWM is a way to control the output voltage stability by changing the switching pulse width, while PFM is when the output voltage changes, through sampling and comparison, the error value is amplified to control the switching pulse period (ie frequency), so that the output voltage is stable.

　　(4) According to the size of the output DC value, switching power supply can be divided into boost switching power supply and step-down switching power supply, and can also be divided into high-voltage switching technology'> high-voltage switching power supply and low-voltage switching power supply.

　　(5) According to the output waveform, the switching power supply can be divided into rectangular wave and sine wave circuits.

　　(6) According to the output performance, the switching power supply can be divided into constant voltage and constant frequency circuits and variable voltage and frequency conversion circuits.

　　(7) The switching power supply can be divided into single-ended type, push-pull type, half-bridge type and full-bridge type according to the number of switching tubes and the connection method. The single-ended type uses only one switch, the push-pull and half-bridge type uses two switches, and the full-bridge type uses four switches.

　　(8) Switching power supply can be divided into forward type and flyback type according to the energy transfer method.

　　(9) According to the soft switching mode, the switching power supply has current resonance type, voltage resonance type, E-type and quasi-E-type resonance type and partial resonance type.

Read recommendations:

30W Open Frame Power Supply

Precision 12V1.8A Switching Power Supply Module bare board 12v22w Switching power supply board

1500W single power supply

Do you really understand laptop batteries and power adapters?

Definition of Nominal Voltage and Current in Power Adapters