News

Home  -  News  -  Industry News

What are the common causes of power adapter damage?

source:Industry News Popular:adapter release time:2022-04-14 11:09:49 Article author:yu

  What are the common causes of power adapter damage?(图1)

  With the popularity of personal smart mobile devices, power adapters have become one of the essential necessities of life. In daily use, the power adapter will be damaged, so what are the common reasons for the damage of the power adapter?

  The first: the output voltage is too high

  The high output voltage generally comes from the voltage-stabilizing sampling and voltage-stabilizing control circuits. In the closed control loop composed of the DC output, sampling resistor, error sampling amplifier such as TL431, optocoupler, power control chip and other circuits, any problem in any of these parts will cause the output voltage to rise.

  The fuse is normal, no output voltage

  The fuse is normal and no output voltage indicates that the switching power supply is not working or has entered a protection state. The first step is to check the value of the start-up voltage of the start-up pin of the power control chip. If there is no start-up voltage or the start-up voltage is too low, check whether the components connected to the start-up pin and the start-up resistor are leaking. If the power control chip is normal, the fault can be quickly found through the above monitoring. If there is a start-up voltage, measure whether the output terminal of the control chip has jumps of high and low levels at the moment of power-on. If there is no jump, it means that the control chip is damaged, the peripheral oscillation circuit components are damaged or the protection circuit is faulty. By replacing the control chip Chip, check peripheral components, check one by one; if it is jumping, in most cases, the switch tube is bad or damaged.

  The second: line failure

  Line faults, including damage to the power cord, no power supply, poor contact port oxidation, etc. Focus on checking whether the input line and output line are powered on. If the line is faulty, it can be solved by replacing the power cord.

  The third type: the insurance burns out or blows up

  Mainly check the rectifier bridge, diodes, switch tubes and large filter capacitors on 300 volts. It may cause the fuse to burn and become black, or it may be caused by a problem with the anti-jamming circuit. It is especially worth noting that the fuse is burned due to the breakdown of the switch tube, which usually burns out the power control chip and the current detection resistor. The thermistor is also easy to burn out along with the fuse.


Read recommendations:

72W bare board power supply

60W power amplifier power supply

60W desktop

Power Adapter Lightning Strike Design Collection

Technical characteristics of full-bridge push-pull converter

Previous:Comparison of power adapter and switching power supply Back to list Next:When the power adapter is in normal use, what is the normal temperature?

The latest article

Related Products

The latest article

What are the types of mobile phone chargers and their functions?

2022-05-21

Advantages of switching power adapters

2022-05-21

Five core functions that the power adapter can achieve.adapter manufacture

2022-05-20

Analysis of the importance of power adapters for notebooks.adapter Processor

2022-05-20

Details of switching power supply in maintenance

2022-05-19

Understand the precautions of the power adapter and be an expert in electricity safety

2022-05-19

This is how the EMC interference of the switching power supply is generated.adapter wholesaler

2022-05-18

The relationship between the nominal voltage and current of the power adapter.power adapter price

2022-05-18

Five basic functions of notebook power adapters.adapter wholesaler

2022-05-17

Lightning surge immunity test method.power adapter price

2022-05-17

Switching power supply ripple source and control

2022-05-16

Level 6 energy efficiency standard power adapter T series

2022-05-16

Children sleeping with pacifiers are prone to tooth decay

2022-05-16

Six methods to deal with the heating problem of switching power supply transformer

2022-05-14

The principle of flyback switching power supply

2022-05-14

Types of thermal protection for power adapters.adjustable power adapter

2022-05-13

Summary of common faults of LED switching power supply

2022-05-13

The power transistor should be used like this in the power adapter

2022-05-12

4 modulation methods of switching power supply

2022-05-12

Some little knowledge about switching power supply

2022-05-11

Laptop Power Adapter Troubleshooting Steps

2022-05-11

9 classification methods of switching power supply

2022-05-10

Advantages and disadvantages of switching power supply current mode

2022-05-10

Advantages and disadvantages of switching power supply current mode

2022-05-09

9 classification methods of switching power supply

2022-05-09

Characteristics and working methods of PFC regulated switching power supply

2022-05-07

Six maintenance rules for drone lithium batteries.manual charger power adapter

2022-05-07

Reasons for Inrush Current in Switching Power Supply Design.adjustable power adapter

2022-05-06

The optimal solution of drone power management solution!12w acdc power adapter

2022-05-06

Characteristics of Switching Power Adapter Transient Loads

2022-05-05